PIX site to site and remote access

[emadehsan]

Dear guys

i have an PIX 515e with 8.0 version and in the other side a 2811 router, the site to site vpn between these two device is established, but i want some remote client can connect to pix ,

so is this possibe two implement site to site and remote access vpn on one pix interface (outside) ??

any hint?

[Jon Marshall · Accepted solution]

Hi

Yes, this is perfectly possible. Please see attached configuration example. Note it is for pix v7.x but it should work fine for 8.x

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml

HTH

Jon