Port Channel

[henokk601]

hi

I have connectivity Cisco ASA 5585-x with Cisco 4500 switch and i want to ask can i make the ASA side redundant-interface and the 4500 switch side interface port-channel interface is that allowed or compatible ?

[Marius Gunnerud · Accepted solution]

That is not compatible.  You can, however, make the ASA side a portchannel and the 4500 switch a portchannel and this will work so long as both are using the same protocol (for example LACP).

--

Please remember to select a correct answer and rate helpful posts

[Leonardo Gama]

Hi,

You can use ASA HA Cluster, with spanned etherchannel.

See the reference: http://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/general/asa-95-general-config/ha-cluster.pdf

Cheers.