I want to setup my PIX so I can VPN into the PIX and gain access to internal network resources.
We have an odd set up as there are 3 interfaces on the PIX. Inside, Outside and VPN.
We just added the VPN ethernet card to the pix.
Right now, our inside interface is setup with a 192.168.2.0/24 network. The external (public) uses static (one to one) nat to translate from public address to private.
In addition to resources that are on that network, we also have a subnet 192.168.1.0/24 in which we now need to have access to. So, we added a new card and gave it an address on the 192.168.1.0/24 subnet so we can gain access to those resources from the pix. Both the 192.168.2.0/24 and the 192.168.1.0/24 subnets are physically seperated via a switch.
When I VPN into the pix, i want to have access to the 192.168.1.0/24 network. Right now, I can connect fine...but can't ping any of those resources...nor can i ping the PIX. im sure its an ACL issue but i can't seem to figure it out.
Thanks for your help...the config is attached.
