05-19-2003 02:47 PM - edited 02-20-2020 10:45 PM
Is it possible to redirect PPTP traffic comming to the outside interface of a PIX that has a single IP or do you actually have to have an entire IP address translated for the PPTP termination Device.
Example I have a PIX with a single public ip address that I currently redirect ports 23 25 53 110 to a 2k server internally. Would I be able to redirect pptp traffic to that server also or will I have problems with gre and need an additional ip address?
Patrick Laidlaw
Solved! Go to Solution.
05-20-2003 01:00 AM
The GRE will cause you problems. PPTP uses both GRE (IP protocol 47) and TCP port 1723. You'll be able to redirect the TCP/1723 traffic, but not the GRE.
To do this, you'll need another separate IP address.
05-20-2003 01:00 AM
The GRE will cause you problems. PPTP uses both GRE (IP protocol 47) and TCP port 1723. You'll be able to redirect the TCP/1723 traffic, but not the GRE.
To do this, you'll need another separate IP address.
05-20-2003 11:33 AM
Thanks I came to the same conclusion but wanted someone to reconfirm.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide