PPTP users over IPsec

[pramod]

Dear Experts,
Please refer the attached scenario.

I have formed an IP sec Tunnel and advertised the LAN subnets & its working fine.
But i have another requirement
External users are connected to site A pix using pptp vpn and once they connected they will get ip range of 192.168.5.1-5.100.My requirement is these subnets 192.168.5.x has to access site B's LAN subnets (10.2.2.0/24) Is this possible, If so what configurations i have to do on PIX. Please help me!
Thanks,
Pramod

[pramod]

Ok hey i can see the below wording in this link

"Ensure the PIX does not terminate Point to Point Tunneling Protocol (PPTP) connections. PIX 7.1 and later does not currently support PPTP termination"

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml

can you comment what exactly ?

[Jitendriya Athavale]

Yes asa does not support pptp termination it supports pptp pass through

Thanks and Regards,

Jitendriya Athavale

Cisco Systems Inc. - Security

Asia Pacific Technical Assistance Centre

Email : jathaval@cisco.com

Phone : +1 408 434 3210

Working hours:

Sunday - Thursday, 8pm - 2am US EDT

Tuesday - Saturday, 10am - 4pm Australia EST

TAC Worldwide contacts: http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html