Problem: ERROR: Unable to add Policy Rules

[Anderson Ribeiro]

Hi guys!

I have a Cisco 6509 with a FWSM.

In FWSM I have a 2 contexts.

Today I tried put a nat line and I received the message:

fwsm-virtual/fw01spo(config)# nat (NUVEM-NEG) 47 access-list NUVEM
ERROR: Unable to add Policy Rules
fwsm-virtual/fw01spo(config)# Access Rules Download Complete: Memory Utilization: 35%

Have you any idea about this?

Thank you.

[Vibhor Amrodia · Accepted solution]

Hi,

Check this Document and collect the respective NP ouputs from the FWSM and also check the elements of the ACl that you are using in this NAT statement.

https://supportforums.cisco.com/document/33031/fwsm-addressing-multiple-context-acl-limit-reached-issues

https://supportforums.cisco.com/document/50566/fwsm-acl-resource-partition-limits-and-troubleshooting#ACL_Partition_Optimization

Thanks and Regards,

Vibhor Amrodia