Qos

[sajjadrizvi87]

                   Is it is possible to configure Qos on mac addresses of users of DHCP pool in ASA 5505

[Julio Carvajal · Accepted solution]

Hello,

No, only based on Ip.

Regards,

[sajjadrizvi87]

thanks for you response but if inside users are getting IPs dynamically via DHCP then what will be solution or is their is any way we can restrict bandwidth utilization to individual user for example tom=1mbps, tac=512

[Julio Carvajal · Accepted solution]

Hello Syed,

From the ASA you can do it but using Ip addreses, the MPF ( Modular Policy Framework ) that is used to configure QoS on the ASA works with Ip addresses, DSCP values, destination traffic flows, port numbers,etc, but not with Mac address that is why if you want to perfom a QoS for a specific user Ip you will need to use a different device to make this happen or reserve an ip address for that user on the DHCP server and then configure the ASA to apply the police or X action to that Ip address.

Hope I could help,

Julio

[sajjadrizvi87]

thank ou very much julio

how can we create Dhcp pool for inside user as i dont have any dhcp server can ASA behave as Dhcp

[Julio Carvajal · Accepted solution]

Yes, The ASA can behave as a DHCP server!

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806c1cd5.shtml

Hope this helps,

Remember to rate all of the helpful posts ( If you do not know how to rate a post just let me know and I will teach you )

Julio