Re:ASA5505 portforwarding for inside server

[CSCO11776584]

Hi All,

I have installed ASA5505 in the network. Port forwarding has been done for one of the server in our LAN. Public users are able to access the server successfully. I am trying to access from inside using the same Public server IP, but unable to access it. Can I have this feature in ASA5505(I think it is loopback configuration). If so, may I know the configuration detail?

Thanks in Advance!!!!

[Julio Carvajal]

Hello,

Is the server on the same interface than the client?

What kind of service does the server provides?

Regards,

Please rate helpful posts.

Julio

[CSCO11776584]

Hi,

Thanks for your reply!!!

The server is connected to one of the ports of switch in LAN.

The server is a ftp server.

[Julio Carvajal]

Hello,

If the clients and the server ( ftp)  are on the same subnet that would not be possible because the traffic will not reach the ASA, just the switch.

Regards,

Julio

[puseth]

Hi,

Are you trying to access the ftp server from inside clients using the public ip address or private ip address of the server?

Can you please post the show run from the ASA? Along with the ip address of the Server you are trying to reach?

Puneet