03-18-2010 07:37 AM - edited 03-11-2019 10:23 AM
Greetings,
After the initial information gathering, I find I am at a standstill as-to how I should procede.
We are currently in the process of implementing One-to-One static NAT'ing on our DMZ servers, and RE-IP'ing them to private IP space.
We need to enable DNS resolution, LDAP authentication between the DMZ servers and our network, while making them accessible tobi the public.
I'm hoping for a bit of hand-holding on this issue, since I am not sure where to begin.
03-18-2010 07:39 AM
On which platform are you going to do this? Can you post current configuration?
Dan
03-19-2010 07:46 PM
Hello,
Static translation for DMZ server :
static (dmz,outside)
access-list inbound extended permit tcp any host
access-group inbound in interface outside // to permit the inbound TCP connections from any outside IP address to the public IP address of server//
Now, coming to your DNS resolution, I would need to know, where is you DNS server located ? For the external clients, external DNS server would take care of name resoultion.
Thank
Vijaya
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide