cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
275
Views
1
Helpful
1
Replies

Replacing AD servers that are integrated with FMC

BoomShakaLak
Level 1
Level 1

The server team will be replacing the existing AD servers with new ones shortly.  The new servers have been added to the network using new hostnames and IPs and will live side by side the old servers until everything else is confirmed OK at which point the old servers will be turned off.  The new servers will then have their IPs updated to that of the old servers.  These servers are also the DNS servers for the network.

Since these new AD servers will eventually be inheriting the IPs of the old AD servers will I actually need to do anything in the FMC Realm configuration?

1 Accepted Solution

Accepted Solutions

Milos_Jovanovic
VIP Alumni
VIP Alumni

Hi @BoomShakaLak,

Given that you'll use same IPs and configuration, no, you don't need to do anything on FMC side.

Kind regards,

Milos

View solution in original post

1 Reply 1

Milos_Jovanovic
VIP Alumni
VIP Alumni

Hi @BoomShakaLak,

Given that you'll use same IPs and configuration, no, you don't need to do anything on FMC side.

Kind regards,

Milos

Review Cisco Networking for a $25 gift card