Replacing PIX with 2811 - https problems

[jcowtan]

I had set up an interim pix that supported an AS/400 HTTPS applcaition to a remote site. No changed were made to the PIX other and setting up PPPoE. It worked from the start!!!

How we are replacing the PIX with a 2811 running 12.3(8)T8. I have attached the conifuration. The AS/400 can no longer access the remote site and its application. What am I missing on the 2811 to support HTTPS like the PIX did?

[a.alekseev]

You need open a case in the cisco tac.

I'm sure that it's a BUG in inspection engine.

[jcowtan]

Found the problem. It was in the server application. We were changing the default route to this test 2811, but the route did not apply. We now have it working.