Replacing PIX with 2811 - https problems
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2005 01:41 PM - edited 02-21-2020 12:13 AM
I had set up an interim pix that supported an AS/400 HTTPS applcaition to a remote site. No changed were made to the PIX other and setting up PPPoE. It worked from the start!!!
How we are replacing the PIX with a 2811 running 12.3(8)T8. I have attached the conifuration. The AS/400 can no longer access the remote site and its application. What am I missing on the 2811 to support HTTPS like the PIX did?
- Labels:
-
Other Network Security Topics
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2005 11:42 PM
You need open a case in the cisco tac.
I'm sure that it's a BUG in inspection engine.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-24-2005 07:59 AM
Found the problem. It was in the server application. We were changing the default route to this test 2811, but the route did not apply. We now have it working.
