Hi,
the router is configured to sent logging messages to syslog servers. It seems OK, but nothing is logged on the syslog servers.
If i do debugging on the router, or go in config mode and exit, the output messages are sent to the syslog server.
I dont understand this, where is the mistake.
Please help, thx in advance.
IZM_Nemport#debug ip routing
IP routing debugging is on
IZM_Nemport#
08-02-2013 01:50:39 Local7.Debug 10.0.7.1 5279: 005276: Aug 2 01:50:39.765 PCTime: RT: NET-RED 0.0.0.0/0
08-02-2013 01:48:44 Local7.Notice 10.0.7.1 5278: 005275: Aug 2 01:48:44.636 PCTime: %SYS-5-CONFIG_I: Configured from console by barkon on vty0 (95.8.156.3)
logging trap debugging
logging source-interface Vlan1
logging 10.0.1.26
logging 10.0.12.1
logging 10.0.12.2
IZM_Nemport#sh logg
Syslog logging: enabled (1 messages dropped, 0 messages rate-limited,
270 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: disabled
Monitor logging: disabled
Buffer logging: disabled, xml disabled,
filtering disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
ESM: 0 messages dropped
Trap logging: level debugging, 5277 message lines logged
Logging to 10.0.1.26 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
5277 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Logging to 10.0.12.1 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
5277 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Logging to 10.0.12.2 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
227 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
