cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2487
Views
0
Helpful
1
Replies

Securing network with ISE profiling HP devices

RSundstrom
Level 1
Level 1

Hello,

How can I create a profile for Hewlett Packard printers and allow them onto the network without also allowing any other HP device free access. I only want to allow HP printers. I do not want to allow HP laptops, notepads, desktops, etc.

I would prefer not to allow them onto the network using MAB.

 

thanks,

Bob

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

This is a common use case. The ISE Profiling Design Guide (see page 76 onwards) lays out at least one way of doing this - using an nmap Probe Endpoint Scan.

View solution in original post

1 Reply 1

Marvin Rhoads
Hall of Fame
Hall of Fame

This is a common use case. The ISE Profiling Design Guide (see page 76 onwards) lays out at least one way of doing this - using an nmap Probe Endpoint Scan.

Review Cisco Networking for a $25 gift card