11-30-2007 08:38 AM - edited 03-11-2019 04:37 AM
I erased wrongly flash from ASA5520.
I have TFTP server and one ASA OS in my computer .I want to send this file in to ASA but I do not know How?
Have anybody help me?
11-30-2007 10:10 AM
from the command line:
copy tftp flash
after that, the prompts will walk you through it.
11-30-2007 10:14 AM
I used this way but as you can see it does not function
rommon #14> ping 192.168.3.45
Sending 20, 100-byte ICMP Echoes to 192.168.3.45, timeout is 4 seconds:
!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (20/20)
rommon #15> tftp
ROMMON Variable Settings:
ADDRESS=192.168.3.253
SERVER=192.168.3.45
GATEWAY=192.168.3.254
PORT=GigabitEthernet0/0
VLAN=untagged
IMAGE=asa723-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
tftp asa723-k8.bin@192.168.3.45 via 192.168.3.254
TFTP failure: Packet verify failed after 20 retries
rommon #0>
11-30-2007 10:21 AM
oh, i didn't know you were in ROMMON mode.
and you tftp server is definitely running? does the tftp server show any errors?
the file, asa723-k8.bin should be inthe root directory of the tftp server also.
11-30-2007 10:36 AM
I am using Solarwinds TFTP server
Tftp does not show error. It is written only < TFTP Server Service Started [UDP -69 ] >
I am log on in ASA device using console cable. I make ping my computer from ASA device but it is not the same when I try making ping Devices from my computer
I can not make ping the 192.168.3.253 device
11-30-2007 11:42 AM
Make sure either udp port 69 is entered in any running firewall exceptions or firewall is disabled
12-01-2007 02:30 AM
I dont understand why I dont make ping ASA device from my computer.
From Hyper terminal I make ping my compjuter.
12-01-2007 12:35 PM
make sure you dont have a firewall installed on your pc that is blocking the tftp application.
-brad
(please rate the post!)
12-04-2007 11:05 AM
You had right the firewall was the problem.
However I dawnload the asa721-k8.bin file in to device but there is the same problem.
ASA does not boot
08-01-2019 08:21 AM
This was a relief because of that firewall is literally blocking the udp 69 port for in and outbound. Once the port is allowed in windows firewall, it should be ok.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide