What would be the best way to setup the Actiontec router so network traffic flows to the ASA properly.
Should we just change the LAN of the router to 192.168.0.1 or set it up as a bridge
Currently the router has a lan of 192.168.1.1
The Default ASA is also 192.1681.1
It would be nice to keep the LAN @192.168.1.1 so all the devices with static ip's on the LAN do not need to be reprogrammed
Also we will need to setup a vpn to access our server from a remote CPU for management and we cannot use RDP do to pci compliance.
