04-14-2010 02:47 AM - edited 03-11-2019 10:32 AM
Running an ASA5520 7.0(8)
Started to experience problems with connectivity between 2 interfaces and one host.
Checking my shuns the ASA show I have an entry similar to this.
shun (net2) 4.4.4.4(server) 0.0.0.0 0 0 0
4.4.4.4 = Public address on one of our servers on Net2. This address is nated to a private IP on the host.
I would like to remove this entry.
no shun 4.4.4.4 - Does not work
How should I do this?
What is different about this shun to the usual ones on the outside public interface?
Any help much appreciated.
Phil
Solved! Go to Solution.
04-14-2010 02:58 AM
If you haven't configured the shun manually on the ASA, then it might have been the IPS which is sending the shun towards the ASA to block that particular ip address.
To clear the host from being shun, you can issue the following command:
clear shun
Hope that helps.
04-14-2010 02:58 AM
If you haven't configured the shun manually on the ASA, then it might have been the IPS which is sending the shun towards the ASA to block that particular ip address.
To clear the host from being shun, you can issue the following command:
clear shun
Hope that helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: