SourceFire Application-filter - Combining the Filters
Is it possible to combine appliaction-filter in one single rule?
As for my understanding when selecting more filters, like Application filter Risk "Very High" togehter with "Business relevance "very low" this enables all inspections for both categories - like the Boolean expression OR.
Is it possible to combine different application filters, for example based on Risk "Very High" AND "Business relevance "Very low", so that only applications with both criteria matched is selected?
It actually takes AND of the filter criteria and if it finds match of both, only then that particular rule is hit. In your case, is the rule in question is placed at the top of any rule which might conflict with it ?
As of June 2020, the Cisco ISE pxGrid App for QRadar Ver 1.1.0 is officially Validated and released by IBM, available for download from IBM XFE. Access the link to download app here.
The Cisco ISE pxGrid App V1.1 supports Cisco Identity Se...
i have an ip that is part of our internal network, i configured route map on the core to redirect the traffic to the firewall for further inspection.i checked the firewall logs i can see the traffic is redirect to the firewall successfully. i could ping o...
Hi, 1)May I know wht it means when context visibility Status showing 'disconnected" and '(blank)'?Difference between 'disconnected" and '(blank)'. Since both devices also not connected.I found tht these devices are no longer connected to the swi...
Hi ,I would like to configure multiple public ip (same subnet) on outside interface of ASA.I want to use static NAT for specific purpose.For example i have 8 public IP and I want to use 1 is internet ,1 for VPN ,1 for DMZ server and all ip want to a...
Hi all, Is it a way to retrieve the IPS policies from our IPS Appliance or censor? I have tried to look for a way but I am not able to do so. May I knwo any way can retrieve the policies from the Appliance either from the Appliance itself o...