SPANTREE-2-BLOCK_PVID_PEER

[BhargavHingu]

Kindly help to resolve issue for below shown logs.

SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 229 on GigabitEthernet0/1 VLAN1.

SPANTREE-2-BLOCK_PVID_PEER: Blocking GigabitEthernet0/1 on VLAN0229. Inconsistent peer vlan

SPANTREE-2-BLOCK_PVID_LOCAL: Blocking GigabitEthernet0/1 on VLAN0001. Inconsistent local vlan.

PM-4-ERR_DISABLE: link-flap error detected on Gi0/1, putting Gi0/1 in err-disable state.

Thanks,

Bhargav Hingu

[BhargavHingu]

Kindly note that native vlan is same in all switches

Thanks ,

Bhargav Hingu

[Florin Barhala]

I am not sure this firewalls related section.
Post your "show run int gi0/1 and show run int (other equipment end interface)"

[BhargavHingu]

Sorry


Regards,
Bhargav