07-13-2013 06:50 PM - edited 03-11-2019 07:11 PM
Hi I previously had a NEXXT Acrux 300 wireless router and with this device I could configure a specific ip address to be given a host based on its mac address and then i was able to configure a specific amount of bandwith limit in KB to that ip address for all protocols or even specific ones and it worked flawlessly, now that im using my asa5505 is there any way i can get these same configurations i would really love this
07-14-2013 06:21 PM
Hello Roberto,
Not possible to provide an IP address via DHCP to a MAC address in specific,
Sorry to inform u that,
Altough if you configure it manually you can configure policing on the ASA to limit the bandwith usage on that machine,
Regards
For Networking Posts check my blog at http://laguiadelnetworking.com/
Cheers,
Julio Carvajal Segura
07-17-2013 11:04 AM
okay so how do i configure the policing part for an ip
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide