Hi I got got two new ASA 5508-X. The software version is 9.5.1 and ASDM is 7.5.1. Previously on my ASA 5505's I was allowed to add addresses like 10.100.0.0 /16 in any of my configurations, now the new ASA's are telling me I cant use that, but I want...
Hi I have a single router that I would like to use for PPPoE. I have two PPPoE connections and my ISP gave me two different username and passwords. I would be grateful if somebody could help me with the configs. I plan to use two separate vlans on a ...
Hi all, I uploaded a sample topology to better explain what I want to do, from the topology attached I have two ASA5505s configured for site to site vpn, ASA2 has a direct tunnel to Site C while ASA1 passes through SITE B to get to C and I configured...
Hi I just bought a 3750 from a company and stacking was configured I tried clearing all settings but the stack configs still come up when reloaded need help disabling stacking.Switch(config)#no switch 1 provision WS-C3750-48TS%Switch can not be un-p...
Hi I have remote vpn setup on my asa5505 and users can login using the Cisco vpn client and they can acess stuff on the local network and so on but i also need the client to reach each other over the vpn tunnel and I need some help with this part. th...
it will affect any configurations you would have had on the interface so once it is reset to defaults you will need to reconfigure the interface to your needs.
Hi You can use a switch like a 3750 and configure private vlans each user can be connected to an isolated port, you will configure a promiscuous port to plug in the router that way they can both see the router and have access to the internet but not ...
Roger, You need to look at the applications and traffic types that will be traversing the network before you can answer that question, based on the topology you posted the network may experience congestion because all the switches are daisy-chained t...
