cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1785
Views
0
Helpful
4
Replies

static overlaps with global in another context

Rizal Ferdiyan
Level 1
Level 1

Guys,

I have ASA 5550, i create 2 context in my ASA 5550. I create a NAT in context A and context B. But when i create NAT in context B i get another i get error message like this "static overlaps with global in another context". I have checked there is same nat translation in context A and context B. My question is : is same nat translation configuration not allowed in context A and context B"

Can you help me guys. ?

Best Regards,

Rizal Ferdiyan

1 Accepted Solution

Accepted Solutions

brquinn
Level 1
Level 1

An IP address cannot be assigned to more than one context. If you had 2 separate filrewalls configured with the same IP address, you would have duplicate IP addresses in your network which is never allowed. The same is true for multiple context mode. I suggest finding another IP to use in one of your contexts. :-)

Thanks,

Brendan

View solution in original post

4 Replies 4

brquinn
Level 1
Level 1

An IP address cannot be assigned to more than one context. If you had 2 separate filrewalls configured with the same IP address, you would have duplicate IP addresses in your network which is never allowed. The same is true for multiple context mode. I suggest finding another IP to use in one of your contexts. :-)

Thanks,

Brendan

Dear brquinn,

thank u for your info, .... it help me so much ^_^.

Best Regards,

Rizal Ferdiyan

Rizal,

Pls. consider marking the discussion resolved so others can see it is resolved and move on to other un-answered or un-resolved questions.

Thanks,

-KS

Ok Sankar,

Thank u for your suggestion.

Best Regards,

Rizal Ferdiyan

Review Cisco Networking for a $25 gift card