05-19-2005 05:15 AM - edited 02-21-2020 12:09 AM
Hello everyone
I have a strange message with my just-upgraded to 7.01 pix 515.
The pix lunch flashfs then i got thoses lines :
Need to burn loader....
Erasing sector 0...[OK]
Burning sector 0...[OK]
Erasing sector 64...[OK]
Burning sector 64...[OK]
At each boot?? Maybe i missed something during the upgrade process ?
Is the pix actually reprogram eproms each time it boots ?
Heres the full boot messages if that helps :
----------------------------------------------------
Cisco Secure PIX Firewall BIOS (4.0) #0: Thu Mar 2 22:59:20 PST 2000
Platform PIX-515
Flash=x @ x
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 115200 bytes of image from flash.
PIX Flash Load Helper
Initializing flashfs...
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 13022208
flashfs[0]: Bytes available: 2976768
flashfs[0]: Initialization complete.
Reading image flash:/image
Launching image flash:/image
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
##############################################################
128MB RAM
Total NICs found: 4
mcwa i82559 Ethernet at irq 10 MAC: 0050.x.x
mcwa i82559 Ethernet at irq 7 MAC: 0050.x.x
mcwa i82558 Ethernet at irq 9 MAC: 0090.x.x
mcwa i82558 Ethernet at irq 11 MAC: 0090.x.x
BIOS Flash=x @ x
Initializing flashfs...
flashfs[7]: 9 files, 3 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 15998976
flashfs[7]: Bytes used: 13022208
flashfs[7]: Bytes available: 2976768
flashfs[7]: flashfs fsck took 22 seconds.
flashfs[7]: Initialization complete.
Need to burn loader....
Erasing sector 0...[OK]
Burning sector 0...[OK]
Erasing sector 64...[OK]
Burning sector 64...[OK]
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
--------------------------------------------------------------------------
. .
| |
||| |||
.|| ||. .|| ||.
.:||| | |||:..:||| | |||:.
C i s c o S y s t e m s
--------------------------------------------------------------------------
Cisco PIX Security Appliance Software Version 7.0(1)
-------------------------------------------------------
05-20-2005 05:08 AM
Hi,
After the upgrade in your pix to 7.0(1), you use a VPN ?
How your system, active/active, function with vpn ?
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide