05-14-2009 08:19 PM - edited 03-11-2019 08:32 AM
Hi Experts, Can we make sub interface on Cisco ASA 5505 model and if its possible then do that interface need to be upgraded into Trunk Port. Pls explain briefly. Thanks
05-15-2009 01:49 AM
No - it's not possible, with a basic license, you need a Security Plus license.
HTH>
05-15-2009 01:54 AM
Yes, we have Security Plus License installed.
05-15-2009 02:03 AM
the just create a sub interface on the physical interface that connects to a trunk port:-
interface ethernet 1.1
vlan <
HTH>
05-15-2009 02:14 AM
Can you explain briefly and give an example, if possible. Thanks
05-15-2009 02:17 AM
See my previous post - explanation & example already provided.
11-03-2011 12:45 AM
Model Guidelines
Subinterfaces are not available for the ASA 5505 ASA
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html
Mike
04-24-2013 06:27 AM
I have been working on a configuration in which I wanted to do subinterfaces as well. I found that you can not create them even with having a security plus license.
Keith
04-24-2013 06:31 AM
Hi,
To my understanding you only configure Vlan interfaces on the ASA5505 just like a L3 Switch.
For example
interface Vlan10
nameif LAN
security-level 100
ip add 10.10.10.1 255.255.255.0
interface Ethernet0/1
switcport access vlan 10
Then you either make physical ports on the ASA5505 as Access Mode ports on that Vlan ID or configure a physical interface as a Trunk
Configuring the Trunk will require the Security Plus License.
- Jouni
07-18-2015 10:20 AM
Sub interfaces are available on all ASA models and Next Gen Models EXCEPT the ASA 5505.
Cisco ASA 5500 - Sub Interfaces and VLANS
Pete
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide