Time Range object missing on PRSM

[michalis1234]

Dear All,

I have an ASA 5515X + CX module (9.2.1.4(5)), i use it for url filtering mostly.

I have a request for a url to be blocked only on working hours. I tried to implement that request by creating a time range object, but unfortunately i do not see

that option on PRSM.

Can you please help ...

Thank s in advance,

[Marius Gunnerud]

Are you trying to configure the ASA or the CX module with the  time based access policy?

If you are tyring to configure the CX module then time based access is not supported until 9.3

http://www.cisco.com/c/en/us/td/docs/security/asacx/roadmap/asacxprsm_new_features.html

--

Please remember to select a correct answer and rate helpful posts

[michalis1234]

Are you sure because the system image of my cx is later than 9.3.1 and i cannot upgrade it.

The version of my asa 9.1.4

What I shall do ?

Upgrdae the asa and then the cx ?

[Marius Gunnerud]

Which version of PRSM are you running?

--

Please remember to select a correct answer and rate helpful posts

[michalis1234]

 CX module (9.2.1.4(5))

Cisco ASA 9.1.4

For your first question: yes i am trying to configure time range object on the CX in order to allow access to specific urls after working hours.

[Marius Gunnerud · Accepted solution]

Then you need to upgrade the CX module.  as per the release notes I posted above time based policies are available in 9.3 and higher.  You can download the boot and system software from the following sites:

Boot:

http://software.cisco.com/download/release.html?mdfid=284325223&flowid=34503&softwareid=284399946&release=9.2.1-4&relind=AVAILABLE&rellifecycle=&reltype=latest

System:

http://software.cisco.com/download/release.html?mdfid=284325223&flowid=34503&softwareid=284399944&release=9.2.1-4&relind=AVAILABLE&rellifecycle=&reltype=latest

--

Please select a correct answer and rate helpful answers

[michalis1234]

You mean that i need to reimage the cx module ?

Which is the process that i need to follow ?