10-10-2018 08:24 PM - edited 02-21-2020 08:20 AM
Hello,
I have an ASA 5508-X which I finally got to work. My lan management IP is 172.20.20.1
I log into it remotely with the AnyConnect client (from windows) and I was hoping to use ASDM or SSH remotely but it does not log in. Furthermore, I can't even ping 172.20.20.1 from from my anyconnect session (vpn ip 10.20.20.4). Strange thing is that I CAN ping other things like 172.20.20.40 (A printer) and I get a response back.
I have tried to enable the IP range (of the anyconnect ip pool) in the management access tab, and still nothing (I should still be able to ping it right?)
If I need to post my config let me know, or if the answer is obvious, let me know also! Thanks.
10-10-2018 10:58 PM
Hello,
Is this management the actual management interface or you are using the LAN interface for accessing ASDM and SSH?
If the interface is LAN interface, below applies:
Is there a 'management-access <interface-name>' command added already.
If you can paste the relevant running config, we can have a look.
HTH
AJ
10-14-2018 02:42 PM
Hello,
This is my error.
Instead of just adding an entry for "ASDM/HTTPS/Telnet/SSH", I should have went also to "Management Interface" and select "Inside".
Also, I needed to generate a self-signed certificate for SSH to work.
Now all ok!
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide