uio

[prashantrecon]

TCP OUTSIDE:192.168.1.1/80 INSIDE:10.1.196.77/56825 flags UfFRIO

TCP OUTSIDE:192.168.1.1/80 INSIDE:10.34.4.133/1223 flags UIO

TCP OUTSIDE:192.168.1.1/80

what is diffrence between two flags

[Marvin Rhoads]

All the connection flags are documented in the command reference here.

The first connection appears to be in the process of shutting down (inside and outside FIN completed)

[Kimberly Adams]

For a quick and easy view of what the flags are showing in the connections, I use the following site for a quick reference.

http://www.howfunky.com/2010/05/cisco-asa-flag-descriptions.html

Thanks and please do rate helpful posts.

Kimberly

[prashantrecon]

TCP outside 10.x.x.x:9000 inside 10.x.x.x:1342, idle 0:00:05, bytes 203, flags UIO

TCP outside 10.x.x.x:9000 inside 10.x.x.x.x:1340, idle 0:00:43, bytes 62, flags UfFRIO

when i checked we are geeting the above flags. far end users are facing problem regarding accessing of site

Usually the flags should be UIO ?

[Kimberly Adams]

In my experience a good connection will have the flags UIO.  Which is the following:

U = up

I = inbound data

O = outbound data

This is good data communications inbound and outbound for this connection.

Thanks and please rate helpful posts.

Kimberly

[prashantrecon]

CP outside 10.x.x.x:9000 inside 10.x.x.x.x:1340, idle 0:00:43, bytes 62, flags UfFRIO

But why this flags immediately after UIO ie after just 2 sec when excuted show connection command