07-26-2013 09:45 AM - edited 02-21-2020 04:56 AM
Hi,
I am trying to add ASA to CSM 4.3 via Add devices from network.
ASA has been config with http server ip and mask then int
i get error https
Connectivity Test Failed. Time Elapsed: 127 seconds. Unable to Communicate With Device No response to connection attempt to this device Please verify the following and then retry this operation. (1) The device "IP address", Communication Protocol Mode and Port are correct.
(2) There is network connectivity between the CS Manager server and the device.
(3) The device is configured to accept http/https connections. To Discover IPS policies from IOS or IPS devices the http/https connections should be enabled otherwise IPS policy discovery should be disabled.
(4) The device is running.
CSM server is conencted to ASA interface.
Regards
Mahesh
Solved! Go to Solution.
07-26-2013 06:35 PM
One easy way to doublecheck is so see if can you can launch ASDM on the CSM server and connect to the firewall.
Both ASDM and CSM rely on the same https connectiivty.
07-26-2013 06:35 PM
One easy way to doublecheck is so see if can you can launch ASDM on the CSM server and connect to the firewall.
Both ASDM and CSM rely on the same https connectiivty.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide