upgrade asa 5510 version 9.1.(6) to 9.2.x

[mrognone]

Hi Cisco Community,

we are looking to upgrade some of our Cisco Asa 5510 from Version 9.1.(6) to 9.2.X
The goal here is add BGP routing , that it's included in those versions.

Unfortunately, I didn't find any information here or other forum about Asa5510, futhermore all oficial documents provided by Cisco dont mention Asa 5510.

for example in this Oficial post by Cisco 
https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html

In Compatibility matrix Asa models are listed after from 5512.
In Download Cisco Image section, ASA 5506-X, ASA 5508-X, and ASA 5516-X are mentioned, but no Asa 5510.

I used Cisco Portal to browse the software version availables for ASA 5510 and the only one that I found is 9.1.(7).

I was ready to surrender, but i prefered to came here and ASK. Maybe someone could help me.

Thanks in advance

[Rahul Govindan · Accepted solution]

Unfortunately, 9.2 is not supported on the ASA5510 hardware. Following is the excerpt from the ASA 9.2 release notes:

https://www.cisco.com/c/en/us/td/docs/security/asa/asa92/release/notes/asarn92.html#pgfId-773511

New Features in Version 9.2(1)
Released: April 24, 2014

Table 4 lists the new features for ASA Version 9.2(1).

Note: The ASA 5510, ASA 5520, ASA 5540, ASA 5550, and ASA 5580 are not supported in this release or later. ASA Version 9.1 was the final release for these models.

 

[mrognone]

Thanks Rahul Govindan. I didnt see that when i was searching on Cisco documentation.