Upgrade ASA5510

[a.guillen]

Hello Gurus of Cisco

I have the following firewall:

Hardware:   ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz

Internal ATA Compact Flash, 256MB

BIOS Flash M50FW080 @ 0xffe00000, 1024KB

and

Cisco Adaptive Security Appliance Software Version 8.2(1)

Device Manager Version 6.2(1)

My doubt, is possible to upgrade to the Memory to 1GB, and what other parameter I will be upgrade

Any suggestion is welcome

[Akshay Dubey]

Yes you can upgrade the RAM to 1 Gb..there shudn't b any issues....


Sent from Cisco Technical Support Android App

[Marius Gunnerud]

If you are going to version 8.3 or higher then you would need to upgrade the memory to a minimum of 1Gig (as Akshay has mentioned).

The only other thing you would need to take into consideration (and you probably know this already) is to change the NAT and ACL statements so they are in accordance with the new rules of using object groups.

[Julio Carvajal]

My doubt, is possible to upgrade to the Memory to 1GB, and what other parameter I will be upgrade

That's it... You just upgrade the memory.. Afterwards you will be able to run any higher version than 8.3

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura