Hi Cisco GurusI have a problem with the configuration of a Switch Cisco:Switch#show flashDirectory of flash:/ 2 -rwx 2002 Mar 3 1993 02:14:20 +00:00 config.text 584 -rwx 5 Mar 3 1993 02:14:20 +00:00 private-config.text 5...
Hi ForumI have a doubt how to implement a new scenarioMy customer have a 5520 (with four Interfaces) firewall with the following version: ASA Version 8.2(5) and his configuration isinterface GigabitEthernet0/1 ...
Gurus.Let me know in what case I must be upgrade my router 1841. In this moment I have DRAM 256 / Flash 64 and using IOS 15,x. This only for curiosity, ???
hi guru, I want to buy a kit of devices to implement a lab of "security" and "routing and switches". Could you tell me the link in the cisco page where suggests the equipment and his images (ios) regards
HI teamLet me know if the netflow could be enable in the version Appliance Software Version 8.0(5). (ASA 5550).Review the document of Cisco mention that this functionality is available in the version 8.1 or supperior.http://www.cisco.com/en/US/produc...
Hi GuruAfter upgrade this switch (24 ports) from "c2960s-universalk9-mz.122-55.SE7" to "c2960s-universalk9-tar.152-1.E2.tar", My IP Phone function correctly. This is the first case that I observe this event. Best RegardsAndres
Hi MikhailovskyVV.These are the versions of my device:ASA> show versionCisco Adaptive Security Appliance Software Version 8.2(5)Device Manager Version 6.4(5)I can download the following images "asa913-k8.bin" and "asdm-715.bin"ASA# dir flash:Director...
Hi JamesBefore any copy and paste, you must be sure that all syntact will be the same from 8.2 to 8.3. Take in consideretion the following link:https://supportforums.cisco.com/docs/DOC-12690Best RegarsAndres
HI OliverA question, from the original (Client) you can reach the NTP Server?, Could you send us the result of the following command:Ping to the NTP serverTraceroute to the NTP serverLet me know if you can reach it
A questionD8-9D-67-96-A6-74, this mac address originaly had (dynamic) the IP address had 10.10.2.99, But If I want to set to 10.10.2.180 (relate to his MAC address Table), using this lines ip dhcp pool user_AxF2800 host 10.10.2.180 255.255.255.0 ...
