is it ok to use two seperate subnets for NAT purpose?
actually it is at one of our new clients.. this is something totally new i have seen....
ip address outside 67.88.68.198 255.255.255.224
ip address inside 192.168.0.1 255.255.255.0
global (outside) 1 interface
global (outside) 1 63.209.42.168 netmask 255.255.255.224
global (outside) 1 67.88.68.199 netmask 255.255.255.224
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
route outside 0.0.0.0 0.0.0.0 67.88.68.193 1
