web server cant be reachable from internet in dmz on ASA 5525
Yesterday I tried to set a DMZ on Cisco ASA 5525
And i have a server in DMZ already with 192.168.10.20
I have also a public IP of 188.8.131.52 from my ISP
So when i hit the ISP IP via internet to access my web server in DMZ it gives me an error that :
The request URL could not be retrieved
But when i place my PC in the middle of ISP and my firewall hit the same public IP i can reach my web server via HTTP port
i have done all my configs including NAT and ACCESS-LIST
How can i resolve this ??
the down are my configurations
interface Gigabit Ethernet/2 name if DMZ security-level 50 IP address 192.168.10.2 255.255.255.0 ! interface Gigabit Ethernet/3 name-if OUTSIDE security-level 0 IP address 184.108.40.206 255.255.255.248 !
object network Web Server host 192.168.10.20 object network Web Global host 220.127.116.11 access-list OUTSIDE_access_in extended permit tcp any object Web Server eq WWW access-list OUTSIDE_access_in extended permit tcp any object Web Server eq https access-list OUTSIDE_access_in extended permit icmp any object Web Server echo pager lines 24 mtu DMZ 1500 mtu OUTSIDE 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (OUTSIDE,DMZ) source static any any destination static WebGlobal WebServer access-group OUTSIDE_access_in in interface OUTSIDE route OUTSIDE 0.0.0.0 0.0.0.0 18.104.22.168 1
On December 8, FireEye reported that it had been compromised in a sophisticated supply chain attack: more specifically through the SolarWinds Orion IT monitoring and management software. The attackers leveraged business software updates in order to distr...
ISE Node TerminologyISE DeploymentsISE Deployment Scale and LimitsISE Hardware PlatformsISE PSN PerformanceISE TrustSec ScalingISE Storage RequirementsISE ERS ScaleISE WAN Bandwidth CalculatorSources
About this Document
Cisco Secure Endpoint (for...