What SNMP tools do you use to monitor your PIX?

moriarty7 · ‎05-07-2004

Currently we are running Solar Winds Orion product and it does not support the Firewall MIB. We own the Solar Winds Engineering edition as well, which does support it, but offers no trending and does not run as a service.

I wanted to find out what tools everyone are using and of course, cost counts... :)

Thanks!

Craig Young

lewy1961 · ‎05-07-2004

Craig ,

we have just moved awaty from HPOpenview both solar winds toolkit , and Orion . with Orion we are able to trace/log cpu and memory , also bandwith and errors on all the 7 in use pix interfaces.We also mirror this on the failover pix as well.The logs are accurate , and we are set to recieve alarms if inteface goes down or bandwidth levels / errors / dropped packets occur. SNMP is set on pix with access to one host , our orion server with snmp in Ro only not Rw.For us Orion has been much more manageable than HpOpenview.

moriarty7 · ‎05-10-2004

I also am using Orion for my 515's and 525's, but it doesn't show anything except for the interfaces of a FWSM.... Anyone monitoring those? :)

Craig