cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cannot access devices on a directly connected subnetwork

844
Views
0
Helpful
0
Comments

Core Issue

These are the most likely causes:

  • Misconfigured IP address
  • Problems in the physical layer

Resolution

To resolve this issue, perform these steps:

  • Ensure that the IP address is configured correctly.
  • Check the physical connectivity, such as the cables, hubs, switches, and Network Interface Cards (NICs).
  • Ensure that the cable is working properly by trying different ports and swapping cables.

For more information, refer to the Troubleshooting Local Connectivity Problems section of Troubleshooting TCP/IP.

Destination

Multiple devices on different network

Source

Single device

Source and Destination Physical Connectivity

Source and destination exist on same subnetwork

This widget could not be displayed.