The Cisco CRS-1 Carrier Routing System (PDF - 2.1 MB) is the industry's only carrier routing system offering continuous system operation, unprecedented service flexibility, and system longevity. Powered by Cisco IOS XR Software, it is designed for always-on operation while scaling system capacity up to 92 Tbps.
The CRS-1 marks a new era in carrier IP (Internet Protocol) communications by powering the foundation for IP Next-Generation Networks (IP NGNs) today while protecting investments for decades to come.
The Cisco CRS-1
Supports an integrated IP over dense wavelength-division multiplexing (DWDM) transponder with flexible 10 Gbps and 40 Gbps options that extends up to 2000 km without regeneration.
Supports standalone configurations of 320-Gbps, 640-Gbps, and 1.2-Tbps systems enabling 40-Gbps per slot capacity in all form factors.
Supports multichassis configurations of 1.2 to 92 Tbps with the use of up to 72 line card shelves and eight fabric shelves all operating as a single system.
Supports both fixed and modular line cards usable across all configurations. The fixed cards feature the world’s first 40-Gbps (OC-768/STM-256) tunable WDMPOS and POS interfaces. The Cisco I-Flex (PDF - 2.1 MB) design offers a portfolio of modular interfaces featuring shared port adapters (SPAs) and SPA interface processors (SIPs).
hi all.. i need to know what is the best security practice for my below config on switch according to the networkdiagram i have ( isp---ASA---Router---SW1----SW2) - im using PVST between sw1 and sw2 and divided the vlans ...
I am trying to add an access list to snmpbut getting the following error. We recently re-ip this switches and the only changes we have made is re-ip mgmt0 and move them into new subnet # snmp-server community foobar use-ipv4acl mgmt-access3Inter...
Recently I configured a 40Gb breakout link between two switches, on one side a Nexus 7706 w/a N77-M324FQ-25L blade, and on the other side, a Nexus 9336C-FX2 connected via a WSP-Q40GLR4L optic. This worked out nice and tidy with the four interfaces o...
Has anyone encountered a certificate issue when trying to use the DialogflowIntent and DialogflowParam elements on UCCE? In the error logs I'm seeing IO exceptions communicating with Google and am getting PKIX errors. Read somewhere that I need to set a W...