Cisco Unified Operations Manager (CUOM) is part of the Cisco Unified Communications Management Suite, and features out-of-the-box, real-time, service-level monitoring of all elements of your system. It performs automatic discovery of the entire system and provides contextual diagnostics for rapid troubleshooting. With CUOM there are no rules to write, no thresholds to define, and no extensive and time-consuming initial setup.
Real-time visualization and monitoring of the entire Unified Communications system enables highly effective monitoring and troubleshooting. Active service assurance ensures that devices and applications are functioning as they should and reveals faults and performance issues before they affect service. Powerful diagnostic tests and troubleshooting capabilities rapidly isolate faults and increase productivity. Correlation, analysis, and presentation of voice service quality data and alerts make use of information available through Cisco Unified Service Monitor (when it is deployed). Inventory and change monitoring enable tracking of complete details of unified communications devices and IP phone inventory. Cisco Unified Operations Manager 2.0 does not deploy any agent software on the devices being monitored, so it will not disrupt system operations
Hi,please tell me,Can I block a switch locally connected in a network with Cisco ASA 5500 series firewall, so that any computer connected to that switch does not get the ip address from firewall dhcp service?Thanks.
I have to open port 1149 to be able to access OpenVPN, but I am not having success with the NAT configuration I made.by the dTCP port checkert, is giving time out, in the output of the show ip nat translate is showing that is translating.attached has the ...
Hi,Can any kind soul help me with my issues I've been facing for almost a week? I'm trying to do static destination NAT with the followings:192.168.1.1 (Source) -> 10.2.2.2 (Destination)Translated Address:192.168.1.1 (Source) -> 10.9.9.9 (Desti...