Join us for the next Cisco Knowledge Network (CKN) Cisco TechAdvantage Webinar, for a 60 minute technical overview of MAP (Mapping Address + Port) technology. We will explain MAP deployment scenarios, design alternatives, addressing plan, and configuration options.
Network operators (e.g. ISPs) who are providing Internet access to wireline residential customers are relying on IPv4 as the underlying network technology. Unfortunately the pool of IPv4 addresses are being exhausted which is hindering further growth of the customer base and connection of more devices. While IPv6 is necessary for the future, IPv6 alone is not a viable option because a significant portion of content and applications are still on IPv4 Internet only. This means that operators MUST maintain IPv4 connectivity while providing native IPv6 Internet access service to their wireline subscribers.
This session will discuss strategies to share IPv4 addresses via IPv6, leveraging an IPv6 enabled access network. There are few options available (DS-Lite, NAT64, MAP), each have their pros & cons, but we believe MAP has the most potential from a scalability, performance and network ubiquity standpoint.
We will also provide tools that will help planning and design of MAP solutions.
Hi guys,Can someone tell me what is the difference between these two extended ACLs?1) permit udp any range 8801 8810 192.168.0.0 0.0.255.2552) permit udp any 192.168.0.0 0.0.255.255 range 8801 8810 Thank you!
Cisco Secure Network Access is helping IT to bridge the gap between what is essential to the business and what the network delivers and to build the next-generation campus network for an unplugged and uninterrupted experience.
Learn more about how these w...
Hello, Regarding RV340 router configuration - Firewall - Access Rules, I have questions hopefully someone can answer.The terrible, inadequate manual, does not ever explain functional behavior of the router, it just repeats what is in the UI. in ...
Hi,i wonder if someone could help me see if something is possible or not. i setup a lot of remote offices for our company. we always get blocks of 5 static IPs we assign to our firewall and voice router. sometimes when the ISP has setup their mo...
I am setting up a test lab and I am a little lost on how to setup my ISR 1100 to connect to the internet. I very new to all this and have already read some guides. Often times the guides don't cover DHCP use on the wan port. I have spectrum internet and u...