there is two ws-sup720-3bxl modules
but when i powered on the switch i found that there is one slot 5 module is in
rommon 5 >
rommon 5 >
rommon 5 >
rommon 5 >
rommon 5 >
rommon 5 >
rommon 5 >
rommon 5 >
and 2nd one is
Router>
Router>
Router>
Router>
Router#show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL14491TQY
2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL14491TQ7
5 0 Unknown (Other) Unknown Unknown
6 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL1438TVJD
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 c471.fe48.6660 to c471.fe48.6663 3.2 12.2(14r)S5 12.2(33)SXI4 Ok
2 c471.fe9c.d1dc to c471.fe9c.d1df 3.2 12.2(14r)S5 12.2(33)SXI4 Ok
5 0000.0000.0000 to 0000.0000.0000 0.0 Unknown Unknown Unknown
6 0022.559e.3688 to 0022.559e.368b 5.12 8.5(4) 12.2(33)SXI4 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card WS-F6700-DFC3C SAL14470K4Z 1.4 Ok
2 Distributed Forwarding Card WS-F6700-DFC3C SAL145020G6 1.4 Ok
6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1438TUC9 1.11 Ok
6 MSFC3 Daughterboard WS-SUP720 SAL1438TRT2 5.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
5 Not Applicable
6 Pass
I am very enthusiastic to configure ws-c6509-e please help me guys to configure this device .......
Thanks in advanced...