Processor pool memory corruption occurs on devices that run Cisco IOS Software Release 12.2(18)SXF.
Cisco bug ID CSCsc84454 identifies this issue. The conditions that trigger this bug are not currently known.
In some scenarios, the memory that is marked as though it belongs to process Dead is allocated under the control of a process that no longer runs. It is normal to have a significant chunk of memory in such a state. For instance, if persistent system data structures are created due to the actions of some process, the memory is marked as though it belongs to that process, but the process does not ever return the memory. Some other process can potentially return it later.
In order to resolve this problem, upgrade to Cisco IOS Software Release 12.2(18)SXF03 or later, which can be downloaded from the Cisco Downloads.
Alternatively, as a workaround, disable the HTTP server with the no ip http server global configuration command.
In case of a memory allocation issue, it is normal to have a significant chunk of memory in such a state. In order to resolve this issue, reload the MSFC, which makes the memory free.
Dear Community,I am currently studying for the CCNP-ROUTE exam in an attempt to pass it before the February 2020 deadline. I am currently studying section 1.3b that has to do with IPv4 and IPv6 fragmentation and I had a couple of questions:1) When the ori...
We just purchased four new Cisco SG 350 28P PoE switches. Now, I need to figure out how to connect them to our network. What is the best way to connect them for redundancy? Do I connect each one to the core switch? Do I try stackin...
Hello, I am working on a unique system & switch configuration where there are middle-man workstations that communicate with each other and a community of servers. Each workstation must also be able to communicate with one single isolated workstat...
Hi We have two edge routers which are connected to ATT and Verizon separately. One of two routers is primary and second one is backup. so almost all of the time only one router work and another router is resting there. Do we have a way to bind the two rou...
Good Day, I am having issues with my ASA configuration and have thus far been unlucky in determining a solution. I have a bunch of hosts in a DMZ and a couple of client nets that they need access to. I need to route and allow traffic from hosts in th...