cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
878
Views
0
Helpful
0
Comments
pfrasca
Community Member

I have a Cisco 1811 router with 2 Ethernet Ports and 1-9 FastEhernet ports( 1-9 act like a switch).  On the Ethernet port I have trunked to my ISP for my private network. And on the FastEthernet1 is the firewall , FastEthernet3  is the Cisco Concentrator and FastEthernet6 ISP internet connection is connect. There is default vlan 1 on the FastEthernet 1-9 .  When I reboot the firewall the FastEthernet1 goes down  as per normal but the LINE PROTOCOL  where the Concentrator is connect goes down as well and does not come up until I log on to the concentrator and ping out from that port.

               ISP ROUTER-----------(FE6)CISCO ROUTER 1811-------(E1)PRIVATE NETWORK (WAN)                                                                                                                                                                                    | (FE1)          | (FE3)

                                                     Concentrator      Firewall                                                                                                                                                  

                                                                         

The Firewall has a public IP address and the Concentrator has a public IP address but they are on different subnets. The ISP router has the firewall subnet as primary and the Concentrator as secondary.

Any clues?

Cheers

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: