The boot loader does not appear in the output of the "show version" command, although the output of the "show bootvar" command displays the boot loader
In order to resolve this problem, upgrade the ROMMON software. To download the latest version of the ROMMON software, go to the Downloads - Switches Software page.
Hi everyone,I've been trying to enable PVLAN on a Nexus 1Kv (5.2x) vethernet port-profile which is already configured as trunk, so I need this port to become "promiscuous trunk".Every config guide and post I found mentions that that prom. trunk is availab...
view more
Does anyone know if its possible to use an IP object group in an extended acl and then apply that acl to a route map? Eg:object-group network TestGroup
172.16.100.0 255.255.255.0
172.16.101.0 255.255.255.0
172.16.102.0 255.255.255.0
172.16.103.0 ...
view more
Hi there! I’m Shawn Wargo - Principal TME @ Cisco :)
This discussion is a companion to the BRKCRS-2810 - Cisco SD-Access: Fundamentals - A Look Under the Hood technical session that I created for Cisco Live (multiple events & regions, since 2016-2017)...
view more
I have a ISP wireless router which connects to my lan. The gateway/dhcp server is connected directly to the isp via fa 0/1. Gateway fa 0/0 is connected to another router "local_router" and is a client of dhcp server. Everything is up and running and worki...
view more
Hello All,We are currently looking to migrate 160+ servers from an EOL stacked switch, and looking at the following options:Catalyst 9600 with 25Gb line cardsNexus 9500 with 25Gb line cardsIf we deployed the Catalyst 9600 this could be managed by Cisco DN...
view more
