(Live Webcast Tuesday December 11, 2018 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 11th, December 2018 at 10hrs PDT
In this event, you will learn more about the best network design practices. The session intends to introduce the attendees to network design, its roots and principles, and the mindset needed to be a successful designer and a holistic network architect. When it comes to network design, a solution is considered successful if it meets business requirements through technology implementation. Network designers are the bridge between technical and business domains. In this role, they must understand the business goals and be able to translate them into requirements that drive the technical implementation.
Network design principles
Network design mindset
Place all together, with examples and scenarios
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017 and 2018. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification. Currently, he is preparing for a CCDE.
I'm using version 16.3.7 of the C3650.increase the logging buffer size to 16000 andIf you increase the logging buffer level to informational, the size goes back to 4096.Are there any setting criteria that I do not know?
Hi there, I want to setup send syslog from a router(public ip) to SNMP server(private ip). I've successful setup sending syslog from another router(private ip) to snmp server(private ip). Do I need to do special con...
Hi Everyone, We are currently leasing a space for our small office operation and we are using the lessor's internet connection (shared among tenants). The lessor requested snmp access to our equipment to monitor our traffic usage (maybe the swit...
Hi Guys, I see that the port-channel with two fast-Ethernet connections has cost of 12. how is it calculated? what is the formula behind that. Also, what if I need to calculate the cost of 4 or 6 Fa connections in port-channel.
We have a ASA5525 9.10 set up with a default route. We tried to add a route-map to split traffic certain traffic by source IP to go out another interface.We can see the traffic getting NAT'ed properly, but we are getting "Routing failed to locate next hop...