Webcast slides: Overview of Cisco's Branch Routing Portfolio
(Live Webcast Tuesday April 23, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This had place on Tuesday 23th, April 2019 at 10hrs PDT
This session provides a broad overview of the branch routing portfolio and enables customers to make the right platform choice for their network. The Enterprise branch routing portfolio offers customers a wide variety of choices based on performance, form factor, LAN and WAN ports, Power over Ethernet (PoE) capabilities, programmability, and application hosting. It even accommodates certain ruggedized requirements that could satisfy most customer needs.
An overview of Cisco 1000 Series Integrated Services Routers (ISR 1000) and Cisco 900 Series Integrated Services Routers (ISR 900)
Migration from Cisco 800 Series Integrated Services Routers (ISR 800) to ISR 1000/ISR 900
An overview of Cisco 4000 Series Integrated Services Routers (ISR 4000
Meena Shar is a product Technical Marketing Engineer for Cisco 4000 Series Integrated Services Routers (ISR 4000) modular platforms and has worked at Cisco for 10 years. Prior to joining the Marketing Engineering team she worked as a Business Unit Escalation Engineer. Presently, she specializes in Quality of Service (QoS), Network-Based Application Recognition (NBAR), application hosting, and programmability on ISR 4000.
Eric Nelsonis a Technical Marketing Engineer for 4G/5G technologies, and for ISR 1000 and ISR 900. He has been with Cisco for almost two decades. In his first 15 years he provided support to different service providers on technologies such as ATM, Time-division Multiplexing (TDM) voice, and IP voice among others. Prior to joining Cisco, Eric worked at a telecommunications company supporting ATM backhaul. Currently, he supports cellular providers in the latest market transition to wireless last mile to Customer Premises Equipment (CPE).
Shameel Ummer is a product Technical Marketing Engineer for ISR 4000 modular platforms. He is responsible for Crypto VPN technology on all the ISR and ASR 1000 platforms as well as for Routing/MPLS/NAT/transport security technologies. Shameel joined Cisco two years ago. Before he joined the Technical Marketing Engineering team, he worked as a Network Consultant Engineer (NCE) for Cisco Security Solutions with Advanced Services. He holds four CCIE certifications; R&S, Service Provider, Security, and Data Center.
Hi all, Been trying to figure this for past week... I have a wireless AP connecting to a gigabit Cisco switch lets say Port 23, then i have a LAN cable connecting to same switch let's say Port 26.- If i connect to the wifi in office, my bandwidt...
i am trying to configure a 1CE1B PRI on my cisco router to use with my digital modem. when i am typing the isdn switch-type and the switch type, i get this: C3825(config)#isdn switch-type primary-ts014 ...
Hi I have 2 Active DC , OTV Used to extend 5 L2 VLAN , F5 used to distribute the load to servers i need to achieve the below east area traffic hits DC1 while west area traffic hits DC2 , what is the technical requirement to achieve such case , do wee need...
Let me begin by saying that i am a novice at This. I have a Cisco 3750G Switch. I have updated the IOS to: BOOT path-list : flash:/c3750-ipbasek9-mz.122-55.SE12.bin Config file : flash:/config.text Private Config file : flash:/private-config.text Enable B...