Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Create a new article
68445
Views
15
Helpful
8
Comments

OIDs for management

Collin Clark
VIP Alumni
VIP Alumni

on ‎09-28-2009 09:30 AM

This document is editable by everyone. If you know of an OID, please add it. If one is incorrect, please correct it and add notes.

Monitoring CPU on Routers

1.3.6.1.4.1.9.2.1.58.0

Monitoring Memory on Routers

1.3.6.1.4.1.9.9.48.1.1.1.6.1

PIX/ASA/FWSM

System: 1.3.6.1.2.1.1

Interfaces: 1.3.6.1.2.1.2

IP: 1.3.6.1.2.1.4

Memory: 1.3.6.1.2.1.4.1.9.9.48

CPU: 1.3.6.1.2.1.4.1.9.9.109

Firewall: 1.3.6.1.2.1.4.1.9.9.147

Buffers: 1.3.6.1.2.1.4.1.9.9.147.1.2.2.1

Connections: 1.3.6.1.2.1.4.1.9.9.147.1.2.2.2

SSL Stats: 1.3.6.1.4.1.3076.2.2.26

IPSec Stats: 1.3.6.1.2.1.4.1.9.9.171

Remote Access Stats: 1.3.6.1.2.1.4.1.9.9.392

FIPS Stats: 1.3.6.1.2.1.4.1.9.9.999999

Active Connections in PIX/ASA Firewall: 1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.7

The total number of currently active IPsec Phase-2 Tunnels: 1.3.6.1.4.1.9.9.171.1.3.1.1.0

You will need the following MIBs: IF-MIB, RFC1213-MIB, CISCO-MEMORY-POOLMIB, CISCO-PROCESS-MIB, ENTITY-MIB, CISCO-SMI, CISCO-FIREWALL-MIB, ASA also adds CISCO-IPSEC-FLOW-MONITOR-MIB, CISCO-FIPS-STAT-MIB, and ALTIGA-SSL-STATS-MIB.

ENTITY MIB

Serial Number for stackable switches

1.3.6.1.2.1.47.1.1.1.1.11.1

IOS Version for stackable switches

1.3.6.1.2.1.47.1.1.1.1.9.1

ARP Cache on a router

1.3.6.1.2.1.3.1.1.2

Last state change of an interface

1.3.6.1.2.1.2.2.1.9.[interface number, ie 27]

Cisco 7206vxr router

CPU: 1.3.6.1.4.1.9.2.1.58.0

Mem: 1.3.6.1.4.1.9.9.48.1.1.1.5.1

Temp intake 1: 1.3.6.1.4.1.9.9.13.1.3.1.3.1

Temp exaust 2: 1.3.6.1.4.1.9.9.13.1.3.1.3.2

Temp exaust 3: 1.3.6.1.4.1.9.9.13.1.3.1.3.3

Temp exaust 4: 1.3.6.1.4.1.9.9.13.1.3.1.3.4

Cisco 6509 Switch Chassis Temperature

Switch Engine intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1007

Switch Engine exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1008

Slot 1 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1001

Slot 1 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1002

Slot 2 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.2001

Slot 2 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.2002

Slot 3 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.7001

Slot 3 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.7002

Slot 4 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.10001

Slot 4 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.10002

Slot 5 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.9001

Slot 5 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.9002

Slot 6 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.3001

Slot 6 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.3002

Slot 7 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.4001

Slot 7 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.4002

Slot 8 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.5001

Slot 8 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.5002

Slot 9 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.6001

Slot 9 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.6002

Results are in Celcius. To convert to Farenheit [* 1.8 + 32]

Cisco AS5300 series

1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.1 = Number of Active DS0's on a DS1

Cisco Nexus 5K and 7K series inlet and outlet temperatures:

1.3.6.1.4.1.9.9.91 (Returns a table for Module, Sensor, Thresholds in Centigrade, Current Temp in Centigrade, and Status)

Certain Cisco 3750's inlet temperature:

1.3.6.1.4.1.9.9.91.1.1.1.1.4

American Power Conversion (APC) Management Cards

Battery Remaning: 1.3.6.1.4.1.318.1.1.1.2.2.1.0

Load: 1.3.6.1.4.1.318.1.1.1.4.2.3.0

Average Hi Voltage: 1.3.6.1.4.1.318.1.1.1.3.2.3.0

Average Low Voltage: 1.3.6.1.4.1.318.1.1.1.3.2.2.0

This one is also quite usefull if you want an 'all is fine' state from the APC UPS's

.1.3.6.1.4.1.318.1.1.1.4.1.1.0

INTEGER {unknown(1),

onLine(2),                     <========  All is fine when it says 2

onBattery(3),

onSmartBoost(4),

timedSleeping(5),

oftwareBypass(6),

off(7),

rebooting(8),

switchedBypass(9),

hardwareFailureBypass(10),

sleepingUntilPowerReturn(11),

onSmartTrim(12)

}

Cheers,

Michel

Comments
Bruce Summers
Level 1
Level 1
‎09-30-2009 04:16 AM

Colin,

this is great, I appreciate it...I'm actually looking for an OID that would allow me to monitor bandwidth..we've deployed an appliance/application called e-Health and on of the captures we're looking for is bandwidth...I'm thinking we would have to do it per interface, but not sure..any suggestions?

Collin Clark
VIP Alumni
VIP Alumni
‎09-30-2009 06:38 AM

CA's E-Health? Yes you will need to monitor bandwidth by each interface. Those OID's are part of MIB-II and are very common.

senthil085
Level 1
Level 1
‎08-26-2010 05:43 AM

Collin,

SSL stats OID needs change.

OID: 1.3.6.1.4.1.3076.2.1.2.26.1.2

Object name: alSslStatsActiveSessions

MIB: ALTIGA-SSL-STATS-MIB

alSslStatsActiveSessions OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current number of active sessions."
    ::= { alStatsSslGlobal 2 }

Cheers

-Senthil.S-

ngoldwat
Level 4
Level 4
‎01-15-2011 07:35 PM

Cisco 6509 Switch Chassis Temperature

Bit more detail:

.1.3.6.1.4.1.9.9.91.1.1.1.1.4
entSensorValue OBJECT-TYPE
    -- FROM    CISCO-ENTITY-SENSOR-MIB
    -- TEXTUAL CONVENTION SensorValue
    SYNTAX        Integer (-1000000000..1000000000)
    MAX-ACCESS    read-only
    STATUS        Current
    DESCRIPTION    "This variable reports the most recent measurement seen
        by the sensor.

        To correctly display or interpret this variable's value,
        you must also know entSensorType, entSensorScale, and
        entSensorPrecision.

        However, you can compare entSensorValue with the threshold
        values given in entSensorThresholdTable without any semantic
        knowledge.
        "


.1.3.6.1.4.1.9.9.91.1.1.1.1.1
entSensorType OBJECT-TYPE
    -- FROM    CISCO-ENTITY-SENSOR-MIB
    -- TEXTUAL CONVENTION SensorDataType
    SYNTAX        Integer { other(1), unknown(2), voltsAC(3), voltsDC(4), amperes(5), watts(6), hertz(7), celsius(8), percentRH(9), rpm(10), cmm(11), truthvalue(12), specialEnum(13), dBm(14) }
    MAX-ACCESS    read-only
    STATUS        Current
    DESCRIPTION    "This variable indicates the type of data
        reported by the entSensorValue.

        This variable is set by the agent at start-up
        and the value does not change during operation."

.1.3.6.1.4.1.9.9.91.1.1.1.1.2
entSensorScale OBJECT-TYPE
    -- FROM    CISCO-ENTITY-SENSOR-MIB
    -- TEXTUAL CONVENTION SensorDataScale
    SYNTAX        Integer { yocto(1), zepto(2), atto(3), femto(4), pico(5), nano(6), micro(7), milli(8), units(9), kilo(10), mega(11), giga(12), tera(13), exa(14), peta(15), zetta(16), yotta(17) }
    MAX-ACCESS    read-only
    STATUS        Current
    DESCRIPTION    "This variable indicates the exponent to apply
        to sensor values reported by entSensorValue.

        This variable is set by the agent at start-up
        and the value does not change during operation."

.1.3.6.1.4.1.9.9.91.1.1.1.1.3
entSensorPrecision OBJECT-TYPE
    -- FROM    CISCO-ENTITY-SENSOR-MIB
    -- TEXTUAL CONVENTION SensorPrecision
    SYNTAX        Integer (-8..9)
    MAX-ACCESS    read-only
    STATUS        Current
    DESCRIPTION    "This variable indicates the number of decimal
        places of precision in fixed-point
        sensor values reported by entSensorValue.

        This variable is set to 0 when entSensorType
        is not a fixed-point type:  voltsAC(1), voltsDC(2),
        amperes(3), watts(4), hertz(5), celsius(6), or cmm(9).

        This variable is set by the agent at start-up
        and the value does not change during operation."

snmpwalk -v2c -c public x.x.x.x 1.3.6.1.4.1.9.9.91.1.1.1.1.4
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.14 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.18 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.19 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.20 = INTEGER: 220
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.23 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.24 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.25 = INTEGER: 220
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.26 = INTEGER: 3
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.27 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.31 = INTEGER: 31
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.35 = INTEGER: 30
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.39 = INTEGER: 29
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.42 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.43 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.46 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.47 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.1001 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.1002 = INTEGER: -127
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.1003 = INTEGER: -127
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.1004 = INTEGER: -127
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.3001 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.3002 = INTEGER: 32
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.3003 = INTEGER: 30
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.3004 = INTEGER: 30
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.3005 = INTEGER: 30
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.4001 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.4002 = INTEGER: 37
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.4003 = INTEGER: 29
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.5001 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.5002 = INTEGER: 38
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.5003 = INTEGER: 32
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6001 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6002 = INTEGER: 42
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6003 = INTEGER: 36
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6004 = INTEGER: 35
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6005 = INTEGER: 39
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.7001 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.7002 = INTEGER: 28
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.7003 = INTEGER: 23
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.7004 = INTEGER: 32
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8002 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8003 = INTEGER: 31
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8004 = INTEGER: 33
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8005 = INTEGER: 32
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8006 = INTEGER: 36
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8010 = INTEGER: 37
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8011 = INTEGER: 36
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8014 = INTEGER: 35
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.8015 = INTEGER: 29

snmpwalk -v2c -c public x.x.x.x 1.3.6.1.4.1.9.9.91.1.1.1.1.1
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.14 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.18 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.19 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.20 = INTEGER: 3
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.23 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.24 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.25 = INTEGER: 3
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.26 = INTEGER: 13
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.27 = INTEGER: 13
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.31 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.35 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.39 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.42 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.43 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.46 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.47 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.1001 = INTEGER: 12 {truthvalue(12)}
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.1002 = INTEGER: 8 {celsius(8)}
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.1003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.1004 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.3001 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.3002 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.3003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.3004 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.3005 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.4001 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.4002 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.4003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.5001 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.5002 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.5003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.6001 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.6002 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.6003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.6004 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.6005 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.7001 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.7002 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.7003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.7004 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8002 = INTEGER: 12
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8003 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8004 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8005 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8006 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8010 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8011 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8014 = INTEGER: 8
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.1.8015 = INTEGER: 8


snmpwalk -v2c -c public x.x.x.x 1.3.6.1.4.1.9.9.91.1.1.1.1.2
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.14 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.18 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.19 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.20 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.23 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.24 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.25 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.26 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.27 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.31 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.35 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.39 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.42 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.43 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.46 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.47 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.1001 = INTEGER: 9 {units(9)}
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.1002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.1003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.1004 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.3001 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.3002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.3003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.3004 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.3005 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.4001 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.4002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.4003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.5001 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.5002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.5003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.6001 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.6002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.6003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.6004 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.6005 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.7001 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.7002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.7003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.7004 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8002 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8003 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8004 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8005 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8006 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8010 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8011 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8014 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.2.8015 = INTEGER: 9

snmpwalk -v2c -c public x.x.x.x 1.3.6.1.4.1.9.9.91.1.1.1.1.3
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.14 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.18 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.19 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.20 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.23 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.24 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.25 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.26 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.27 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.31 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.35 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.39 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.42 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.43 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.46 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.47 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.1001 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.1002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.1003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.1004 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.3001 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.3002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.3003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.3004 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.3005 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.4001 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.4002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.4003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.5001 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.5002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.5003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.6001 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.6002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.6003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.6004 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.6005 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.7001 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.7002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.7003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.7004 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8002 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8003 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8004 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8005 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8010 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8011 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8014 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.3.8015 = INTEGER: 0

erwin.zilg1
Level 1
Level 1
‎04-13-2017 01:15 AM

Cisco ASR1001

sysOID :  1.3.6.1.4.1.9.1.1165

Which OID do I have to use in order to get infos on :

- input traffic (bits/sec)

- output traffic (bits/sec)

?

SFDCSupportNSS@cognizant.com
Level 1
Level 1
‎09-24-2018 03:11 AM

Hi Team,

   We have IPsec Tunnel connectivity between multiple locations.

And for bacndwidth monitoring we need OID for VPN connectivity. 

 

Could you please help to get OID for my device details

Firewall - ASA 5510

VPN    - IPSEC 

SFDCSupportNSS@cognizant.com
Level 1
Level 1
‎09-24-2018 03:13 AM

Hi Team,

  Could you please help to get OID for my device details

Firewall - ASA 5510

VPN    - IPSEC 

tomhumford
Level 1
Level 1
‎04-07-2024 07:43 PM

Hi all, 

I have a device cisco 4461 with OID .1.3.6.1.4.1.9.1.2680 but could not find its Serial Number OID.

Can you please help to check or share a tool to check?

Thanks,

Tom

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents

Review Cisco Networking for a $25 gift card