Server TFTP Cisco

[rperalta_2004]

The articule ¨How to download image to a Cisco via TFTP using tftpdnld ROMMON Command¨ the direction IP 171.69.1.129, Is IT a Server TFTP from Cisco?

Do I have to connect the first lan direct a Internet using the tftpdnld ROMMON Commad confifuring the first port Lan? Do I have to do a user register for download Image from the Server TFTP´s Cisco?

Thanks very much.

[amitsin]

tftpdnld feature is use to TFTP the image from any TFTP server application running on your PC. For example connect any PC with the tftp server on it, locate the downloaded inage in the TFTP server's directory. Set the same range of IP address on you pc that you will give on the router's interface.

Set all the parameters in the tftpdnld option and you will be good to go.

rommon 3 > set

PS1=rommon ! >

IP_ADDRESS=172.18.16.76

IP_SUBNET_MASK=255.255.255.192

DEFAULT_GATEWAY=172.18.16.65

TFTP_SERVER=172.18.16.2

TFTP_FILE=c2600-is-mz.113-2.0.3.Q

Invoke this command for disaster recovery only.

WARNING: all existing data in all partitions on flash will be lost!

Do you wish to continue? y/n: [n]: y

Receiving c2600-is-mz.113-2.0.3.Q from 171.69.1.129 !!!!!.!!!!!!!!!!!!!!!!!!!.!!

File reception completed.

Copying file c2600-is-mz.113-2.0.3.Q to flash.

Erasing flash at 0x607c0000

program flash location 0x60440000

rommon 22 >

[rperalta_2004]

Thank you for their help, but I want that you explain to me the following thing, the tftpdnld only allows connection to a Server TFTP located in my network, by means of It I cannot make an upgrade of the IOS of the Router from the Cisco´s Site, neither to obtain the image of the IOS of the router.

Very grateful