Hi Guys,
Need a help..
I am trying to implement the 802.1X .....I am facing a problem related to the authentication retires, the scenario is as follows;
Windows7 Client ----> 3750 switch (12.2(55)SE) ----> ACS5.2
Below is the switch interface configuration;
interface GigabitEthernet1/0/1
switchport access vlan 111
switchport mode access
switchport voice vlan 211
authentication host-mode multi-domain
authentication order mab dot1x
authentication port-control auto
authentication timer restart 2
mab
dot1x pae authenticator
dot1x max-req 4
spanning-tree portfast
When I am connecting the PC to the switch port, two times I will get the pop-up window to enter the username and password then after that I will not give you the option for authentication window......but when I pointed the radius server as ACS4.2 (instead of 5.2) I am getting the authentication page four times....also I tried to change the timeout values but it is giving the same result..
it will be great If anyone can help me.....Thanks in advance
Rgds
Sudheer