10-02-2001 02:29 PM - edited 03-08-2019 08:48 PM
Hello, we have used up a full class C with static mappings to servers behind the PIX 520. We have another Class C on the same circuit. Can we start adding mapping from that Class C to servers behind the PIX or will it not route?
Thanks!
Rich
10-03-2001 09:06 AM
Yes, you can map to another class C network, but you cannot have the PIX configured with a secondary IP address on the interface. This means that you require a router to perform the routing between the PIX and the new network.
10-09-2001 03:38 PM
So to recap, I have statics and conduits from every real address to an internal address. Now I want to add another class, and create statics and conduits to additional addresses inside. So when I add addresses from the second Class C, isn't the PIX going to reject it saying "not in same subnet as outside interface"?
Thanks!
Rich
10-09-2001 05:00 PM
No, it will not the pix knows nothing about routing. Only that it has statics...and what is mapped to them.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide