CAS error

[rajasbha]

Hi,

I am not able to ping the CAS server from the switch , but am able to ping CAM

From desktop , I can also ping the CAS server  and my AD

Any help is highly appriciated -thanks in advance

In mesages  I see the following error

NAS2 racoon: INFO: 192.168.17.231[500] used as isakmp port (fd=10)

Jun 13 NAS2 racoon: INFO: 192.168.17.231[500] used for NAT-T

Jun 13 NAS2 racoon: INFO: 192.168.0.231[500] used as isakmp port (fd=11)

Jun 13 NAS2 racoon: INFO: 192.168.0.231[500] used for NAT-T

Jun 13 -NAS2 racoon: ERROR: failed to bind to address 192.168.15.230[500] (Address already in use).

Jun 13 NAS2 racoon: ERROR: failed to bind to address 192.168.1.230[500] (Address already in use).

Jun 13 -NAS2 racoon: ERROR: failed to bind to address 192.168.1.230[500] (Address already in use).

Jun 13 -NAS2 racoon: ERROR: failed to bind to address 192.168.1.230[500] (Address already in use).

Jun 13 NAS2 racoon: ERROR: failed to bind to address 192.168.1.230[500] (Address already in use).

[Shrikant Sundaresh]

Hi Rajashree,

In an L2 setup, ideally, you wouldn't be able to ping the CAS untrusted from the switch, since there is no SVI for the untrusted VLAN.

However, to troubleshoot your issue, a detailed topology diagram would be required.

If you can provide a topology with ip addresses of CAS/CAM/Switch and desktop marked, along with the SVIs and routes on the switch, we might be able to troubleshoot the issue.

-Shrikant