Hi all,
I tried to upgrade the firmware in my 3640. After introduce one flash and not possible to manage files in the slot I rebooted the system.
Slot is not know in show file system command but in Show ver is correct.
show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
- - opaque rw system:
129016 44120 nvram rw nvram:
- - opaque rw null:
- - network rw tftp:
* 33030140 12919608 flash rw flash:
16515068 1011092 flash rw slot1:
- - opaque ro xmodem:
- - opaque ro ymodem:
[...]
125K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)
16384K bytes of processor board PCMCIA Slot1 flash (Read/Write) 125K bytes of non-volatile configuration memory.
After that we replaced the card for another and any card is recognised in that slot. I reboot again and slot0: is still not found!!
For other hand no news files are seen in slot1: when introduced new card (we try with 3 cards) Only original card is recognised.
Do you have any idea?
Thanks a lot!
Víctor
